Brother MFC L5705DW Driver download Windows
Connecting your brother MFC L5705DW printer to your windows computer allows you to print and scan from your windows computer. You can connect your MFC L5705DW printer either using an USB cable or through a wireless network connection. Connecting your L5705DW printer using an USB cable allows you to scan and print from your windows setup and it is as follows:
- Unbox your need brother MFC L5705DW
- Remove the packing materials from your L5705DW
- Open the top cover of your MFC L5705DW
- Move all the eight drum locks to the directions specified.
- Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly.
- Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
- Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the MFC-L5705DW printer and close the top cover.
- And then, open the paper tray out and extend the paper extension and load enough number of papers. Now, close the paper tray.
- Connect the power cord to your printer and to an electrical outlet.
- Poweron your L5705DW
- Connect the USB cable to the computer at once when your MFC L5705DW printer is ready with the first time installation. Also, your computer must be connected to an active network connection.
- At once when your Computer is connected to the L5705DW printer, the built in drivers for your Brother MFC L5705DW printer will automatically gets downloaded in your Brother MFC L5705DW
- While connecting the USB cable, make sure that you place your computer and printer at a minimum distance.
- Now, turn off your brother MFC-L5705DW printer and turn on your printer again. Now, you can print and scan from your MFC L5705DW
You can connect your Brother MFC L5705DW printer and your windows computer to a wireless network connection and can enjoy printing from your computer as follows:
- Unbox your Brother MFC L5705DW
- Remove the packing materials from your L5705DW
- Open the top cover of your MFC-L5705DW
- Move all the eight drum locks to the directions specified.
- Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly.
- Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
- Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the MFC-L5705DW printer and close the top cover.
- And then, open the paper tray out and extend the paper extension and load enough number of papers. Now, close the paper tray.
- Connect the power cord to your printer and to an electrical outlet.
- Poweron your L5705DW
- Connect both your computer and brother MFC L5705DW Driver printer to an active wireless network connection.
- Open the control panel and click on hardware and sound from your windows computer.
- Click on devices and printers and then click add a printer.
- If your brother MFC-L5705DW printer name appears in the list, choose it.
- If your Brother MFC-L5705DW printer name does not appear, then click on the printer that I want isn’t listed and add your L5705DW printer using a TCP / IP address or host name and then click next.
- Then, type your IP address and click on query the printer and auto select the driver to me and click on next.
- Now, choose your MFC L5705DW printer and click next.
- In your windows update, update the printer list and select your brother MFC L5705DW Driver install printer and click next.
- Then, click finish and now you can enjoy printing from your windows computer.