Brother DCP L5650DN Driver Download

Brother DCP L5650DN Driver download Windows

Connecting your brother DCP L5650DN printer to your windows computer allows you to print and scan from your windows computer. You can connect your DCP L5650DN printer either using an USB cable or through a wireless network connection. Connecting your L5650DN printer using an USB cable allows you to scan and print from your windows setup and it is as follows:

  • Unbox your need brother DCP L5650DN
  • Remove the packing materials from your L5650DN
  • Open the top cover of your DCP L5650DN
  • Move all the eight drum locks to the directions specified.
  • Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly.
  • Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
  • Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the DCP-L5650DN printer and close the top cover.
  • And then, open the paper tray out and extend the paper extension and load enough number of papers. Now, close the paper tray.
  • Connect the power cord to your printer and to an electrical outlet.
  • Poweron your L5650DN
  • Connect the USB cable to the computer at once when your DCP L5650DN printer is ready with the first time installation. Also, your computer must be connected to an active network connection.
  • At once when your Computer is connected to the L5650DN printer, the built in drivers for your Brother DCP L5650DN printer will automatically gets downloaded in your Brother DCP L5650DN
  • While connecting the USB cable, make sure that you place your computer and printer at a minimum distance.
  • Now, turn off your brother DCP-L5650DN printer and turn on your printer again. Now, you can print and scan from your DCP L5650DN

You can connect your Brother DCP L5650DN printer and your windows computer to a wireless network connection and can enjoy printing from your computer as follows:

  • Unbox your Brother DCP L5650DN
  • Remove the packing materials from your L5650DN
  • Open the top cover of your DCP-L5650DN
  • Move all the eight drum locks to the directions specified.
  • Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly.
  • Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
  • Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the DCP-L5650DN printer and close the top cover.
  • And then, open the paper tray out and extend the paper extension and load enough number of papers. Now, close the paper tray.
  • Connect the power cord to your printer and to an electrical outlet.
  • Poweron your L5650DN
  • Connect both your computer and brother DCP L5650DN Driver printer to an active wireless network connection.
  • Open the control panel and click on hardware and sound from your windows computer.
  • Click on devices and printers and then click add a printer.
  • If your brother DCP-L5650DN printer name appears in the list, choose it.
  • If your Brother DCP-L5650DN printer name does not appear, then click on the printer that I want isn’t listed and add your L5650DN printer using a TCP / IP address or host name and then click next.
  • Then, type your IP address and click on query the printer and auto select the driver to me and click on next.
  • Now, choose your DCP L5650DN printer and click next.
  • In your windows update, update the printer list and select your brother DCP L5650DN Driver install printer and click next.
  • Then, click finish and now you can enjoy printing from your windows computer.

BROTHER DCP L5650DN Driver Download

Brother DCP L5650DN Driver download Mac

  • Unbox your Brother DCPL5650DN
  • Remove the packing materials from your L5650DN
  • Open the top cover of your DCP-L5650DN
  • Move all the eight drum locks to the directions specified.
  • Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly.
  • Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
  • Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the DCP-L5650DN printer and close the top cover.
  • And then, open the paper tray out and extend the paper extension and load enough number of papers. Now, close the paper tray.
  • Connect the power cord to your printer and to an electrical outlet.
  • Power on your L5650DN
  • Connect your Mac device to a network connection.
  • In the browser of your device, type brother DCP-L5650DN drivers for Mac and search.
  • In the brother printer support link, choose your MAC version, language and your brother DCPL5650DN printer from  the printer list  and click on search.
  • You can choose a variety of printer driver packages from the list.
  • Choosing the full driver and software package is recommended most, as it will help you print and scan from your DCP-L5650DN printer in an advanced state.
  • Also, you can choose separate printer driver for your DCP-L5650DN printer and this contains specific drivers which will not allow you use your brother DCP L5650DN printer to the most. Your brother DCP L5650DN printer Mac setup is over.

BROTHER DCP L5650DN Driver Download

Brother DCP L5650DN Printer Toner Cartidges Install

 Your brother DCP L5650DN printer is pre installed with the drum unit and toner cartridge assembly. So, you must simply remove the packing materials and load papers to use it for printing and it is as follows:

  • Unbox your Brother DCP L5650DN printer.
  • You will find a drum unit and toner cartridge assembly, a driver installation CD, a reference guide, a power cord, a quick setup guide and a product safety guide along with your DCP L5650DN printer.
  • Remove the packing materials from your L5650DN printer.
  • Open the top cover of your DCP L5650DN printer.
  • Move all the eight drum locks to the directions specified.
  • Take away each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found underneath the drum unit and toner cartridge assembly. While installing the drum unit and toner cartridge assembly, do not touch anywhere in the assembly as it may damage the assembly cause printing issues.
  • Then, shake the drum unit and toner cartridge assembly to each sides to male the toner cartridges move freely.
  • Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the DCP L5650DN printer and close the top cover.
  • Open the paper tray that is found under the drum unit.
  • Install the white sheets in the paper tray and adjust the width guides. Do not adjust the width guides too tightly as this may damage your paper and may cause paper stuck issues.
  • Now, connect the power cord that you got along with the package to your printer and to an electrical outlet.
  • Poweron your L5650DN printer. Before switching on your printer, make sure that you have removed all the packing materials away from your Brother DCP L5650DN printer to  avoid printing issues. For picture reference, see to the reference guide provided along with your brother DCP L5650DN printer.